Skip to product information
Thermal Lexum X-128 liquid metal thermal paste syringe for CPU, GPU and PS5
1/7

X-128 Thermal Lexum Liquid Metal Thermal Paste

for CPU, GPU, Laptop & PS5

  • Ultra-High Conductivity
  • Gallium-Based
  • Gaming PC Cooling
4.6 41 Happy Customers
Sale price  Rs. 899.00 Regular price  Rs. 999.00
In Stock Ships from Bengaluru, India
Size
  • Free Delivery 500+
  • 7-Day Returns
  • Secure Checkout

Delivery FREE on orders Rs. 500+ · Rs. 65 below

COD Pay Rs. 120 now, rest at the time of delivery

X-128 liquid metal thermal paste by Thermal Lexum is a gallium-based liquid metal compound for builders chasing the lowest temperatures their hardware can reach — on gaming PCs, overclocked GPUs, gaming laptops and the PS5.

Why X-128

  • Ultra-high conductivity — gallium-based liquid metal pulls heat off the chip far faster than regular thermal paste.
  • Up to 40–60°C lower temperatures — the biggest temperature drop under full load.
  • Higher sustained clocks — with that much heat gone, CPUs and GPUs stop throttling and FPS stays smooth and steady.
  • Built for long sessions — holds its performance through 8+ hour gaming marathons.

Made for

  • High-end and overclocked gaming PCs (Intel & AMD CPUs, delidded CPUs)
  • NVIDIA and AMD GPUs and gaming laptops
  • PS5 — the liquid metal upgrade for a cooler, quieter console
  • Competitive, high-refresh-rate rigs and extreme builds

Liquid metal vs regular thermal paste

Standard thermal paste is a ceramic or metal-oxide compound. Liquid metal is a metal alloy that stays liquid at room temperature, so it transfers heat far better than any paste. It is the choice of overclockers and the material Sony uses in the PS5. Read our guide: Liquid Metal vs Thermal Paste.

⚠ Electrically conductive — apply with care

  • Apply only on the CPU / GPU die or heat spreader.
  • Keep it away from capacitors, VRMs, circuit traces and the motherboard; wipe any excess immediately.
  • Do not use with aluminium heatsinks — copper or nickel-plated only.
  • Recommended for experienced builders. Damage caused by incorrect application is not covered.

Not sure liquid metal is right for you? Try Q-17 or Q-12 thermal paste — non-conductive and safe for everyone.

How to apply

Applying X-128 Liquid Metal, safely.

Liquid metal conducts electricity. Take your time, protect nearby components and use only a tiny amount.

  1. Check your coolerLiquid metal is only for copper or nickel-plated contact plates. Never use it on aluminium — gallium reacts with it.
  2. Power off and cleanUnplug the machine, remove the cooler and wipe the die and cooler plate with the alcohol wipe until both are completely clean and dry.
  3. Protect the areaCover the tiny components around the die with Kapton tape or a conformal coating so a stray drop cannot short them.
  4. Spread a thin filmPlace a very small drop on the die and work it out with the cotton swab until the surface looks like an even mirror. Coat the cooler contact area thinly too. No beads or pools.
  5. Mount and inspectKeep the board flat, re-mount the cooler evenly and check for any spill before powering on. Then test under load.

Full guide: Liquid metal vs thermal paste – which should you use?

Stuck at any step? Message us on WhatsApp — we will guide you.

You may also like