Liquid Metal vs Thermal Paste: Which One Should You Use?

Thermal Lexum X-128 liquid metal vs Q-17 thermal paste Cinebench R23 temperatures

Liquid metal can cut CPU and GPU temperatures further than any regular thermal paste, but it is not the right choice for every build. Here is how liquid metal thermal compound compares with thermal paste, when to use each, and how to stay safe.

What is liquid metal thermal compound?

Thermal Lexum X-128 liquid metal syringe and pack

Liquid metal is a metal alloy that stays liquid at room temperature. Because it is a metal, it moves heat far better than the ceramic or carbon fillers in a normal paste. Thermal Lexum X-128 is a eutectic alloy rated for −50 °C to +200 °C and comes in a precision syringe (1g, 5g or 10g).

What is thermal paste?

Thermal Lexum Q-12 and Q-17 thermal paste viscosity comparison

Thermal paste is a non-metal compound that fills the microscopic gaps between a chip and its cooler. Good paste is easy to apply, safe on any cooler and lasts for years. Q-17 is rated at 17.6 W/m·K and Q-12 at 13.6 W/m·K; both are non-corrosive.

Liquid metal vs thermal paste: quick comparison

Liquid metal (X-128) Thermal paste (Q-17 / Q-12)
Cooling performance Highest – lowest possible temperatures Very good – Q-17 17.6 W/m·K, Q-12 13.6 W/m·K
Electrically conductive Yes – must not touch nearby components Safe for normal use
Cooler compatibility Copper or nickel-plated only – never aluminium Any cooler
Ease of application For experienced builders Easy, beginner friendly
Best for Delidded CPUs, laptops with copper heatsinks, extreme overclocking Gaming PCs, GPUs, laptops, PS4/PS5, Xbox, servers

When should you use liquid metal?

  • You want the absolute lowest CPU or GPU temperatures for overclocking.
  • Your cooler or heatsink is copper or nickel-plated copper.
  • You are comfortable insulating the area around the die (for example with Kapton tape or conformal coating).

When thermal paste is the better choice

Liquid metal works on copper heatsinks only – never use it on aluminium

  • Your cooler has an aluminium base – liquid metal reacts with aluminium and damages it.
  • You want a quick, low-risk repaste on a gaming PC, GPU or laptop.
  • It is your first time repasting.

Liquid metal and the PS5

Sony uses liquid metal on the PS5 APU from the factory, which is why “PS5 liquid metal” is such a common search. Replacing it is an advanced job: the area around the chip must stay sealed, the right amount matters, and opening the console can affect your warranty. If you are not experienced, a high-quality thermal paste such as Q-17 is the safer option for consoles.

How to apply liquid metal safely

  1. Clean both surfaces completely with isopropyl alcohol.
  2. Protect the components around the die.
  3. Apply a very small drop and spread it into a thin, mirror-like layer with the included applicator.
  4. Cover the matching area of the cooler base with a thin layer too, then mount the cooler evenly.
  5. Keep it away from children; do not swallow and avoid contact with eyes and skin.

Our recommendation

For most gamers and PC builders, Q-17 thermal paste gives excellent temperatures with no risk. Choose X-128 liquid metal when you need every last degree and your hardware is compatible. New to repasting? Start with our step-by-step thermal paste guide.