Q-17 Thermal Lexum Thermal Paste
for Processor, GPU, Console, Laptop
- 17.6 W/m-K Thermal Conductivity
- Excellent Performance
- Easy to Apply
- Non Corrosive
- Free Delivery 500+
- 7-Day Returns
- Secure Checkout
Delivery FREE on orders Rs. 500+ · Rs. 65 below
COD Pay Rs. 120 now, rest at the time of delivery
High-conductivity thermal paste rated at 17.6 W/m·K, made for hardware that runs hot for hours on end — gaming GPUs, mining hash boards and servers.
Why Q-17
- 17.6 W/m·K conductivity — fast, efficient heat transfer from chip to cooler.
- 8–15°C cooler GPUs under load compared with standard paste.
- No pump-out — stays in place through months of 24/7 use, without frequent re-application.
- Easy to apply — spreads smoothly for even coverage, even on large GPU dies.
- Non-corrosive — safe on all common cooler and chip surfaces.
Made for
- Gaming PCs and overclocked GPUs
- Laptops and consoles
- ASIC and GPU mining rigs running 24/7
- Servers and workstations
Compatibility
All modern CPU sockets and GPU coolers — stock, AIO and custom loop.
How to apply
Repaste in five steps.
Everything you need to clean and apply is in the pack. Set aside about 15 minutes.
- Power offShut down and unplug. On a laptop, disconnect the battery before opening it.
- Remove the old pasteTake off the cooler and clean the chip and cooler plate with the included alcohol wipe until no old paste is left.
- Apply the pasteDesktop CPU: a pea-sized dot in the centre. Laptop or GPU die: a thin, even layer covering the die — use the included spatula.
- Re-mount evenlyPlace the cooler straight down and tighten the screws a little at a time in a diagonal (cross) pattern for even pressure.
- Test your tempsRun a game or stress test and watch temperatures in a monitoring tool such as HWiNFO to see the difference.
Full guide: How to apply thermal paste on a CPU or GPU · Best thermal paste for gaming PC, laptop and PS5
Stuck at any step? Message us on WhatsApp — we will guide you.